Panels for interiors and displays
A metal panel is often the largest piece of metal in a room: the brushed front of a reception counter, a stainless sheet behind a service area, a set of aluminum backs for a retail display, a feature panel at the end of a corridor. Because so much of it is on show, the work is mostly about flatness, clean edges and a finish that looks the same from the first panel to the last.
We cut panels from sheet to your sizes, form the edges you specify, and add returns, stiffening folds or back tabs where a large flat panel needs help to stay flat. Openings for outlets, vents or display hardware can be cut in the shop, so your team does not have to cut metal later.
Edges and returns
The edge of a panel decides how it meets the wall, the counter or the next panel. A flat cut edge suits panels set into a frame. A single return gives the panel depth and hides the cut edge. A double return or a hem gives a soft, safe edge for panels people touch. We show these options on the Panels and sheets page and help you choose based on how the panel will be fixed.
Planning a set of panels
We start from your elevation or layout drawing and work out how the panels split across the sheet sizes available for the material. The aim is to keep joints where your design wants them and to keep the grain of brushed panels running the same way across the whole set. We send the panel layout back with the quote, so you can see the splits before anything is cut.
Each panel is marked with the reference from your drawing on the back or on the film, and the set is packed in the order your team will need it.
Materials for panels
Aluminum keeps large panels light and easy to handle. Stainless steel stands up well behind service counters and in spaces that are cleaned often. Mild steel suits panels that will be painted, powder coated or given a dark blackened look. The Aluminum fabrication and Stainless steel fabrication pages go into more detail on each.
What people ask about metal panels manufacturing
How large can a single panel be?
That depends on the sheet sizes for the material and on how the panel is edged. We tell you the largest practical panel for your design in the quote and suggest where joints would sit.
Can you cut openings for outlets or hardware?
Yes. Mark the openings on the drawing with their positions and sizes, and we cut and deburr them in the shop before the edges are formed.
Will large panels stay flat?
Large thin panels can flex. We suggest a return, a stiffening fold or a back tab where it helps, and we talk through the thickness choice with you before quoting.
Can you make a sample panel first?
Yes. A small sample with the chosen edge and finish is a good way to confirm the look before the full set is made.


